Injector nozzle BLLA 150 P 1197/ - DLLA150P1197
Product description
BOSCH INJECTOR NOZZLE: DLLA150P1197\ – FULL SPECIFICATION
I. Key Identification & Compatible Injectors
Nozzle (Injector Tip) P/N: DLLA150P1197
BOSCH MEC / Catalog Number: 0 433 171 755
System Manufacturer: BOSCH Common Rail Diesel Injection System.
Compatible Injector Assembly P/N(s):
- BOSCH Injector References: 0 445 110 126, 0 445 110 290
- OEM / Vehicle Manufacturer: HYUNDAI diesel engines
- Typical OEM Applications: Hyundai H-1, Tucson, Santa Fe, Porter, and other 2.5–3.0 L CRDI engines.
II. Vehicle / Engine Application & Technical Data
Primary Vehicle Application: HYUNDAI 2.5–3.0 L CRDI diesel engines for passenger cars, SUVs, and light commercial vehicles.
Engine Type: Inline-4 and inline-6 diesel engines with Common Rail injection.
Injector Technology: BOSCH Solenoid-Type Common Rail Injector.
Nozzle Type: DLLA150P1197 — precision multi-hole nozzle for optimized atomization.
Number of Holes: 7–8 (depending on model)
Spray Angle: 150°
Hole Diameter: ~0.130–0.135 mm
Material: High-strength, heat-treated tool steel.
Fuel Compatibility: EN 590 Diesel / Biodiesel blends up to B7.
III. Critical Technician Notes (MUST-DO)
1. Injector Calibration: After nozzle replacement, perform injector coding and calibration (IMA/ISA) using diagnostic tools.
2. Sealing Components: Always replace copper washers and O-rings when reinstalling injectors.
3. Injector Bolts: Use new stretch bolts — never reuse old ones.
4. Clean Installation: Ensure a completely clean working environment; contamination can cause premature injector failure.
5. System Verification: Perform leak-back test, pilot injection calibration, rail pressure check, and full engine performance verification after installation.